Russells logo

 
Agriculture Industrial & Construction Groundcare Fabrication
 
HOVER MOWERS  
 

Invented by Kahl Dahlman in Sweden in 1964 the hover mower has become a major lawnmower product design chosen by professionals and consumers throughout the world.

The engine is connected to the lower impellor which draws in air through the top of the mower deck and forces it along the surface of the underside of the deck moving it in a circular motion. This allows the machine to hover just above the ground and also sucks the grass blade into an upright position to ensure a clean and even cut.

 

 

In addition the circulating air stream allows each grass cutting to be re-cut many times before the air stream forces them back into the turf.

  • Will work on slopes up to 45 degrees
  • Strong ABS deck for years of durability
  • Powerful 4-stroke Honda engines
  • Model 446 fitted with the Oregon FlexiBladeTM System - safer than a bar blade. It’s quick and easy to change and gives a clean cut with minimal bruising.

446 Hover Trim
 

Engine: Honda GCV135

Capacity: 135cc

CuttingWidth: 46cm (18")

Cutting Height: 18-30mm

DryWeight: 17.6kg

Working Angle: 45 Degrees (Head Up)

Cutter System: Flexiblade™ Disc

  • Will work on slopes up to 45 degrees
  • Strong ABS deck for years of durability
  • 46cm (18" cut)
  • Flexiblade™ - safe, durable nylon but with metal blade performance
  • Powered by powerful 4-stroke Honda GCV135 engine

 

450 Professional
 

Engine: Honda GCV160

Capacity: 160cc

CuttingWidth: 51cm (20")

Cutting Height: 16-34mm

DryWeight: 19kg

Working Angle: 45 Degrees (Head Up)

Cutter System: Metal Bar Blade

  • Will work on slopes up to 45 degrees
  • Strong ABS deck for years of durability
  • 51cm (20" cut)
  • Bar Blade
  • Powered by powerful 4-stroke Honda GCV160 engine

453 Professional
 

Engine: Honda GCV160

Capacity: 160cc

CuttingWidth: 53cm (21")

Cutting Height: 14-32mm

DryWeight: 19kg

Working Angle: 45 Degrees (Head Up)

Cutter System: Metal Bar Blade

  • Will work on slopes up to 45 degrees
  • Strong ABS deck for years of durability
  • 53cm (21" cut)
  • Bar Blade
  • Excellent performance, great power to weight ratio, easy start, very durable
  • Powered by powerful 4-stroke Honda GCV160 engine

top curve

New Groundcare Machinery

New Holland
Hayter
Pedestrian mowers
Cylinder mowers
Rotary mowers
Zero-turn mowers
Hover mowers
Toro
Kubota
bottom curve
Russells (Kirbymoorside) Ltd, Eden Works, Old Malton, Malton, North Yorkshire, YO17 6RD Company Reg. No. 00178738 Back to top